UBIWHOLE-HOUSEUBI / MATERIALS
Choose a category, then compare its selections.
Library total: 187 · Shown on this page: 49–72
Woodworking adhesives
Component or accessory
Milky water-based emulsion adhesive for wood, paper and porous panels; resin system, water-resistance class and pressing conditions require product confirmation.
4 material illustrations
Interior wall finishes
Finish
Decorative coating for prepared interior walls, used with compatible substrate and primer; resin, sheen, washability and application conditions depend on the selected product.
4 material illustrations
Interior wall preparation
Component or accessory
Thin interior levelling compound made from fine mineral fillers and binders; the evidenced product is non-water-resistant and must not be presented for wet areas or waterproofing.
4 material illustrations
Wood veneer
Material
Reconstituted veneer made from real wood layers with repeatable, design-controlled grain and colour.
4 material illustrations
Wood veneer
Material variant
Natural veneer colour-treated while retaining visible timber grain and organic variation.
4 material illustrations
Browse linked selections · 2 ↗
Wood
Material variant
Natural oak timber with open pores, straight or cathedral grain and possible ray fleck; the exact oak species and grade remain project selections.
4 material illustrations
Wood
Material variant
Natural walnut timber with warm medium-to-dark brown heartwood and restrained straight or flowing grain; origin and botanical species require confirmation.
4 material illustrations
Wood
Material variant
Fine-textured North American cherry with warm pink-brown to red-brown heartwood and gentle natural darkening; colour variation must be approved on samples.
4 material illustrations
Panels
Material
A full-depth solid-wood strip panel in which shorter timber pieces are lengthened with visible interlocking finger joints and then joined across the width.
4 material illustrations
Panels
Material
An engineered board made with compressed agricultural-straw fibre or fragments; composition, binder, class and performance remain product-specific confirmations.
4 material illustrations
Panels
Material
A furniture panel made from full-depth solid-wood strips joined side by side with grain running predominantly in one direction; it is distinct from CLT and blockboard.
4 material illustrations
Wood
Material variant
Pale ash-family solid timber with clear growth-ring contrast, mostly straight grain and an open texture; exact botanical species, origin and grade require confirmation.
4 material illustrations
Wood
Material variant
Pale New Zealand pine solid timber with generally straight grain, visible earlywood and latewood bands and restrained natural knots; botanical species and grade require confirmation.
4 material illustrations
Wood veneer
Material variant
A thin natural elm face applied to a stable core, typically showing warm light-to-medium brown colour and expressive interlocked or cathedral grain; species and layup require confirmation.
4 material illustrations
Wood veneer
Material variant
A thin natural walnut face over a stable core, with warm medium-to-dark brown colour and restrained straight or flowing grain; origin, species and layup require confirmation.
4 material illustrations
Wood veneer
Material variant
A thin natural oak face applied to a stable core, with open pores, straight or cathedral grain and possible restrained ray fleck; exact oak species and layup require confirmation.
4 material illustrations
Panels
Material variant
A panel with parallel full-depth rubberwood strips forming the core beneath thin face layers; it is distinct from MDF, particleboard, plywood and an unjointed solid slab.
4 material illustrations
Panels
Material variant
A plywood core built mainly from pale poplar veneers with adjacent grain directions cross-laminated; botanical species, ply count, adhesive and grade require confirmation.
4 material illustrations
Panels
Material variant
A plywood core built mainly from eucalyptus-family veneers with adjacent grain directions cross-laminated; species, origin, ply count, adhesive, grade and performance require confirmation.
4 material illustrations
Woven natural materials
Material
Prepared natural rattan strips or cores woven into open or dense webs for cabinet inserts, furniture panels and interior details; species, treatment and grade require confirmation.
4 material illustrations
Coatings & finishes
Finish
A cured furniture or interior coating based on natural lacquer sap, represented through deep colour, layered visual depth and restrained lustre on wood substrates.
4 material illustrations
Glass-ceramic surfaces
Material
A dense polished decorative glass-ceramic slab used as a tabletop or countertop surface, with fine clouded crystalline depth rather than quartz aggregate or a porcelain body.
4 material illustrations
Browse linked selections · 4 ↗
Decorative glass
Material
A tempered-glass tabletop with a stone-like decorative image associated with the glass surface, retaining a visible glass edge, optical reflection and depth.
4 material illustrations
Panels
Grade option
An MDF selection whose applicable formaldehyde-emission documentation meets the ENF grade of GB/T 39600-2021; appearance alone does not establish the grade.
4 material illustrations
No matching entries. Change the category or entry type, or clear the filters.
START WITH YOUR PROJECT
Bring a rendering, CAD drawing, BOQ, sample or reference image. We can start from the information you have.
Start a project